#Torque pro track recordee user manual serial#
#Torque pro track recordee user manual manual#
#Torque pro track recordee user manual portable#

The use of a Mitutoyo printer interface makes it even easier to access and store all data from the torque and data collection system. All readings can be stored in memory or downloaded to a computer or printer, depending on your needs. ENTER, STAT and SETUP buttons are also provided in the membrane key pad area of the CDI Torque MULTITORQ device. Other buttons include the UP and SHIFT options to scroll through numeric values or choose between TRACK and PEAK modes or to switch between blinking digits and flags during programming.

#Torque pro track recordee user manual serial#

Other selections on the membrane keyboard of the data acquisition system include SEND, which sends the data to the serial port, RS-232 printer or a Mitutoyo statistical printer, as well as the CLEAR function, which removes the most recent reading from the display.

#Torque pro track recordee user manual manual#

Use the membrane keyboard to select the units of conversion, manual ZERO TARE, STORE for recording memory of present torque readings, and RECALL for the last reading from memory. Power on or off and bring the torque and data collection system out of SLEEP mode, if necessary, using the Battery Saver Switch on the side of the unit. The user can then select TRACK mode to display the torque values as they are applied or choose the PEAK mode to display the highest torque value applied. Both high and low torque limits can be adjusted to provide either an audible or visual alarm. Torque target settings can be entered directly on the keyboard. Simple and straightforward use of the electronic torque meter is provided through the functions of a push button membrane keyboard. All of these options are designed to provide the user with the most available data necessary to effectively use the data acquisition system and torque analyzer of the overall torque and data collection system.

Other features of the wide angle LED display include the use of a green-colored LED to indicate MIN (minimum) preset torque for presently applied torque and a red-colored LED to note MAX (maximum) preset torque. The graph on the display will move left to right for CW and right to left for CCW torque inputs. When using the ALARM preset value, a ten segment analog bar graph is used to provide a real-time indication of the applied torque. Other displays include OVER torque alarm and LO BATT (low battery) monitor. The display feature is used for all SETUP programming, with UPPER (+) and LOWER (-) percentage values for the ALARM preset, and to indicate any functions or fault conditions. The user can also choose to view the highest torque value captured in PEAK-HOLD mode if desired. 5 inch wide-angle LCD that shows the applied torque in TRACK mode. The user can choose from several selectable readouts, including ft-lb, in-lb, in-oz, Nm, dNm, mkg, and cmkg units, depending on the sensor in use. The CDI Torque MULTITORQ electronic torque meter features a wide angle viewing LCD. There are many advantages associated with establishing quality control through the use of a torque and data collection system. The MULTITORQ tool is a highly versatile torque analyzer and data acquisition system that can be used with a wide variety of sockets, extensions, universal joints, ratcheting drivers, or any combination to meet the needs of manufacturing and assembly.

#Torque pro track recordee user manual portable#

CDI Torque offers a portable electronic torque meter, which can be used to display torque readings from sensors that attach between sockets and drivers. Establishing a quality torque control program is extremely important to the success of any consumer product.